Green Flow Solution logo
Schedule Service

Troubleshooting code

Back to all 58SB0 Comfort™ 80 Gas Furnace error codes

Carrier 58SB0 Comfort™ 80 Gas Furnace 12 troubleshooting

Blower on after power up. Use this page to document the issue and prepare for service. GreenFlow should handle diagnosis for electrical, refrigerant, lockout, or recurring conditions.

Schedule Service +1 (857) 767-6414

What the code means

12: Blower on after power up

The blower is running after power-up as part of the furnace control status sequence.

System area
Indoor blower / startup
Service level
Service recommended

Safe checks before calling

  • Confirm the thermostat or controller is powered, set correctly, and calling for heating or cooling.
  • Check filters, return-air grilles, supply registers, and visible airflow paths that can be reached without opening equipment panels.
  • Look for visible outdoor-unit or rooftop obstructions, debris, snow, ice, or blocked clearances from a safe location only.
  • Take photos of the displayed code or LED pattern, equipment nameplate, thermostat or controller, and the surrounding equipment area before scheduling service.

When to stop and call GreenFlow

Call GreenFlow if the code repeats, the unit is locked out, heating or cooling is not restored, there is flame, gas, electrical, refrigerant, pressure, compressor, fan-motor, rooftop-access, or warranty-related concern, or any troubleshooting would require opening equipment panels.

Share the visible code, model and serial number if available, photos, current symptoms, and whether the issue affects heating, cooling, or both.

12 questions

What does 12 mean on a Carrier 58SB0 Comfort™ 80 Gas Furnace?

The blower is running after power-up as part of the furnace control status sequence.

What should I safely check before scheduling service?

Confirm thermostat or controller status, check filters and visible airflow restrictions, look for outdoor-unit or rooftop obstructions from a safe location, and take photos of the code or LED pattern and nameplate. Do not open electrical, gas, refrigerant, or rooftop control compartments.

When should GreenFlow handle this code?

Call GreenFlow if the code repeats, the unit is locked out, heating or cooling is not restored, there is flame, gas, electrical, refrigerant, pressure, compressor, fan-motor, rooftop-access, or warranty-related concern, or any troubleshooting would require opening equipment panels.

Brands We Service

Popular cities

Service Areas

Our Happy Customers

Anna G.

They quickly identified the issue with the heating system and fixed it efficiently. He explained everything clearly and made sure I understood what was going on. Very professional and reliable, extremely satisfied with the service.

Ray

Just had a service call because my tankless water heater stopped working with E110 code. Andrey located the root cause real quick and fixed the issue within half an hour, also gave reasonable recommendations for further maintenance.

Sharad W.

Green Flow and the people who work there are terrific. Vlad and Andre are excellent. Andre was very helpful. He was punctual, respectful, efficient and knowledgeable. He did not try to sell me something I didn’t need ( as others have done before). I was charged $99 which...

Randy J.

Thanks to Andrey for an amazingly quick response to my request for a service call. He diagnosed and fixed my issue within 24 hours of my asking for help. Excellent service. Thanks.

View All