What the code means
2 Flashes: Coil temperature sensor out of range
The Trane defrost control indicates the coil temperature sensor is out of range, open, or shorted.
Troubleshooting code
Back to all 5TWX5030A1 error codes
Trane 5TWX5030A1 2 Flashes troubleshooting
Coil temperature sensor out of range. Use this page to document the issue and prepare for service. GreenFlow should handle diagnosis for electrical, refrigerant, lockout, or recurring conditions.
Safe checks before calling
- Confirm the thermostat is on, set correctly, and calling for heating or cooling.
- Check the air filter and visible return-air path for obvious airflow restrictions.
- Look around the outdoor unit for leaves, snow, ice, or other visible obstructions without opening the cabinet.
- Take photos of the thermostat, outdoor unit, nameplate, and any visible flash pattern before scheduling service.
When to stop and call GreenFlow
Call GreenFlow if the code repeats, the system is locked out, heating or cooling is not restored, there is ice buildup, electrical odor, unusual noise, or any issue involving pressure switches, sensors, wiring, refrigerant, reversing-valve operation, or warranty coverage.
Share the visible code, model and serial number if available, photos, current symptoms, and whether the issue affects heating, cooling, or both.
2 Flashes questions
What does 2 Flashes mean on a Trane 5TWX5030A1?
The Trane defrost control indicates the coil temperature sensor is out of range, open, or shorted.
What Trane message is associated with 2 Flashes?
The Trane source used for this page associates 2 Flashes with "Coil temperature sensor out of range". Match the visible display text, LED pattern, or alert wording to the exact code whenever possible.
What system area does 2 Flashes point to?
This code is grouped under outdoor coil sensor in the source-backed Trane troubleshooting data.
Which Trane documentation supports this 2 Flashes page?
Source-backed Trane ODR-SVX009B-EN LED fault-code table for 5TWX5 heat pumps.
Is 2 Flashes an LED or flash-pattern code?
Yes. The Trane source row for this item is based on a displayed LED or flash pattern. Count the pattern exactly and compare it with the documented 2 Flashes entry before interpreting the fault.
Is 2 Flashes a sensor-related alert?
Yes. The documented row connects 2 Flashes to outdoor coil sensor. Sensor-related alerts should be interpreted by the exact code and operating mode rather than grouped with unrelated sensor faults.
Is 2 Flashes related to defrost operation?
Yes. The Trane source row groups this item under defrost operation. The exact code matters because Trane separates different defrost fault patterns and causes.
Does 2 Flashes involve a control, board, drive, or module?
The Trane source row points to outdoor coil sensor. Record the exact code and visible alert text before any reset so the control history is not lost.
What information should be captured for 2 Flashes before clearing alerts?
Capture the exact code, any displayed alert text, the model and serial number, thermostat or control status, operating mode, symptoms, and photos of the display or LED pattern before the alert history is cleared.
Brands We Service
No matching featured brand found.
Popular cities
Service Areas
No matching service area found
Try another nearby city or contact GreenFlow to confirm service availability.