Product troubleshooting
Trane S8V2C100M5PDB troubleshooting and error codes
These codes are matched from manufacturer documentation to this model's series or control platform. Keep checks visible and safe; do not open electrical, refrigerant, gas, combustion, or sealed equipment compartments.
Source-backed code set
29 matched codes
| Code | Meaning | System area | Priority |
|---|---|---|---|
| E01 | Internal control failure | Integrated furnace control | Urgent |
| E2.1 | Retries exceeded; flame never sensed | Ignition and flame sensing | Urgent |
| E2.2 | Recycles exceeded; established flame was lost | Ignition and flame sensing | Urgent |
| E2.3 | First-stage gas valve not energized when expected | Gas valve control | Urgent |
| E3.1 | Shorted first-stage pressure switch | Pressure switch circuit | Urgent |
| E3.2 | Open first-stage pressure switch | Pressure switch circuit | Urgent |
| E3.3 | Shorted second-stage pressure switch | Pressure switch circuit | Urgent |
| E3.4 | Open second-stage pressure switch | Pressure switch circuit | Urgent |
| E4.0 | Open high limit switch | Thermal limit and safety circuit | Urgent |
| E4.1 | Open reverse-airflow limit switch | Thermal limit and safety circuit | Urgent |
| E4.2 | Open rollout limit switch | Thermal limit and safety circuit | Urgent |
| E05 | Flame detected when it should not be present | Flame sensing | Urgent |
| E6.1 | Reversed voltage polarity | Power and grounding | Urgent |
| E6.2 | Bad grounding | Power and grounding | Urgent |
| E6.3 | Igniter open or igniter relay failure | Ignition circuit | Urgent |
| E7.1 | First-stage gas valve energized without request | Gas valve control | Urgent |
| E7.2 | Redundant relay energized when it should not be | Redundant relay / HLO output | Urgent |
| E08 | Low flame sense | Flame sensing | Urgent |
| E11 | Internal gas valve error | Gas valve control | Urgent |
| E12 | Open low-voltage fuse | Low-voltage protection | Urgent |
| E13 | Blower HP or OEM ID mismatch | Blower identification | Urgent |
| E14 | Configuration file error | Configuration data | Urgent |
| E17 | Blower communication error | Blower communication | Urgent |
| E23 | Menu parameters not received | Control communication | Urgent |
| E24 | Internal ACM/CCM communication error | Control communication | Urgent |
| E25 | Orientation sensor out of bounds | Orientation sensor | Urgent |
| E26 | Return static pressure transducer out of bounds | Return static pressure transducer | Urgent |
| E27 | Return air thermistor out of bounds | Return air thermistor | Urgent |
| E28 | Supply air thermistor out of bounds | Supply air thermistor | Urgent |
No matching error codes found.