What the code means
E24.2: CAN communication lost
The Trane S9V2 Link-enabled operation alarm table identifies E24.2 as CAN communication lost.
Troubleshooting code
Back to all S9V2 96 Two-Stage Variable Speed Gas Furnace error codes
Trane S9V2 96 Two-Stage Variable Speed Gas Furnace E24.2 troubleshooting
CAN communication lost. Use this page to document the issue and prepare for service. GreenFlow should handle diagnosis for electrical, refrigerant, lockout, or recurring conditions.
Safe checks before calling
- Confirm the thermostat is on, set correctly, and calling for heating or cooling.
- Check the air filter and visible return-air path for obvious airflow restrictions.
- Look around the outdoor unit for leaves, snow, ice, or other visible obstructions without opening the cabinet.
- Take photos of the thermostat, outdoor unit, nameplate, and any visible flash pattern before scheduling service.
When to stop and call GreenFlow
Call GreenFlow if the code repeats, the system is locked out, heating or cooling is not restored, there is ice buildup, electrical odor, unusual noise, or any issue involving pressure switches, sensors, wiring, refrigerant, reversing-valve operation, or warranty coverage.
Share the visible code, model and serial number if available, photos, current symptoms, and whether the issue affects heating, cooling, or both.
Showing services from our catalog
ResidentialCommercialSupport
AHRI Certificate Matching Support
Match supported indoor and outdoor equipment combinations to AHRI certification records for planning and documentation.
View service details
ResidentialRepair
Air Conditioner Blowing Warm Air
Find the cause of warm air from a central AC system and restore proper cooling where possible.
View service details
ResidentialRepair
Air Conditioner Not Cooling Repair
Diagnose an air conditioner that runs but does not provide expected cooling.
View service details
ResidentialRepair
Air Conditioner Short Cycling Repair
Diagnose frequent AC starts and stops involving airflow, controls, electrical parts, sizing, or refrigerant conditions.
View service details
ResidentialRepair
Air Conditioner Water Leak Repair
Diagnose condensate drainage, pan, coil, and pump conditions that cause water around an AC system.
View service details
ResidentialRepair
Air Conditioner Will Not Turn On
Diagnose an AC system that does not start or respond to the thermostat.
View service detailsE24.2 questions
What does E24.2 mean on a Trane S9V2 96 Two-Stage Variable Speed Gas Furnace?
The Trane S9V2 Link-enabled operation alarm table identifies E24.2 as CAN communication lost.
What exact Trane alarm message is tied to E24.2?
The Trane S9V2 Link-enabled operation alarm table associates E24.2 with "CAN communication lost".
What equipment family does this E24.2 page apply to?
This page uses the Trane S9V2 Link-enabled furnace alarm-code data set for S9V2 variable-speed gas furnaces.
What system area does E24.2 point to?
The source-backed S9V2 row groups E24.2 under control communication.
Which Trane documentation supports this E24.2 entry?
Source-backed Trane FNR-SVN001A-EN Link-enabled furnace error-code table for S9V2 variable-speed furnaces.
Which documented alarm-code row is this page based on?
This page is based on the S9V2 row where the code is "E24.2" and the Trane alarm message is "CAN communication lost".
Is the alarm message wording important for E24.2?
Yes. The documented row pairs E24.2 with "CAN communication lost"; both the code and the message should be matched before using this page.
Does this E24.2 page cover S9V2 Link-enabled furnaces?
Yes. The source set for this record is the Trane S9V2 Link-enabled furnace alarm-code data set.
Can this E24.2 row be assumed for a different Trane product family?
No. This record is tied to the S9V2 Link-enabled furnace data set. A different Trane product family should use its own documented alarm or error-code table.
What documented system area is listed for E24.2?
The S9V2 row lists the system area for E24.2 as "Control communication".
Does the documented system area replace diagnosis for E24.2?
No. The system area "Control communication" organizes the documented alarm row; it does not by itself identify every jobsite cause.
What does the Trane row say about E24.2 in plain terms?
The Trane S9V2 Link-enabled operation alarm table identifies E24.2 as CAN communication lost.
Why is the product model shown with this E24.2 page?
The page connects the documented S9V2 alarm row to a specific stored Trane product, so the visible product model, code, and message stay together.
Is E24.2 a generic HVAC fault code?
No. The code and message on this page come from the S9V2 Link-enabled furnace alarm table, so the exact S9V2 model and displayed code should be matched to the documented row.
Should E24.2 be interpreted from the code alone?
No. The documented meaning for E24.2 should be read with the associated message "CAN communication lost" and the system area "Control communication".
Does E24.2 identify the same issue as every other S9V2 alarm?
No. The S9V2 alarm table separates individual codes. This page is for E24.2, which the source-backed row defines as "CAN communication lost".
What should be matched before using this E24.2 page?
Match the furnace family, the visible alarm code, and the exact alarm message to the documented S9V2 row before using this page as service-prep context.
Why does this page mention control communication?
That wording comes from the Trane S9V2 alarm-code row. It is the system area used to organize the documented E24.2 condition.
Is E24.2 related to communication between controls?
The Trane source row identifies this as a communication-related condition. Preserve the displayed code and any companion alert text before clearing or resetting controls.
Does E24.2 involve a control, board, drive, or module?
The Trane source row points to control communication. Record the exact code and visible alert text before any reset so the control history is not lost.
What information should be captured for E24.2 before clearing alerts?
Capture the exact code, any displayed alert text, the model and serial number, thermostat or control status, operating mode, symptoms, and photos of the display or LED pattern before the alert history is cleared.
Brands We Service
No matching featured brand found.