Green Flow Solution logo
Schedule Service

Troubleshooting code

Back to all 5TDM5C04AC31 error codes

Trane 5TDM5C04AC31 Running 6s 4 flashes troubleshooting

Evaporator inlet pipe temperature sensor error. Use this page to document the issue and prepare for service. GreenFlow should handle diagnosis for electrical, refrigerant, lockout, or recurring conditions.

Schedule Service +1 (857) 767-6414

What the code means

Running 6s 4 flashes: Evaporator inlet pipe temperature sensor error

Trane AHR-SVX008A-EN LED indicator system-failure table for 5TDM5 air handlers identifies running indicator light out for 6 seconds then flashing four times as an evaporator inlet pipe temperature sensor error.

System area
Evaporator inlet sensor
Service level
Service recommended

Safe checks before calling

  • Confirm the thermostat is on, set correctly, and calling for heating or cooling.
  • Check the air filter and visible return-air path for obvious airflow restrictions.
  • Look around the outdoor unit for leaves, snow, ice, or other visible obstructions without opening the cabinet.
  • Take photos of the thermostat, outdoor unit, nameplate, and any visible flash pattern before scheduling service.

When to stop and call GreenFlow

Call GreenFlow if the code repeats, the system is locked out, heating or cooling is not restored, there is ice buildup, electrical odor, unusual noise, or any issue involving pressure switches, sensors, wiring, refrigerant, reversing-valve operation, or warranty coverage.

Share the visible code, model and serial number if available, photos, current symptoms, and whether the issue affects heating, cooling, or both.

Running 6s 4 flashes questions

What does Running 6s 4 flashes mean on a Trane 5TDM5C04AC31?

Trane AHR-SVX008A-EN LED indicator system-failure table for 5TDM5 air handlers identifies running indicator light out for 6 seconds then flashing four times as an evaporator inlet pipe temperature sensor error.

What should I safely check before scheduling service?

Check thermostat status, filter condition, visible outdoor-unit obstructions, and take photos of the flash pattern and nameplate. Do not open electrical panels or refrigerant-side components.

When should GreenFlow handle this code?

Call GreenFlow if the code repeats, the system is locked out, heating or cooling is not restored, there is ice buildup, electrical odor, unusual noise, or any issue involving pressure switches, sensors, wiring, refrigerant, reversing-valve operation, or warranty coverage.

Need help with this code?

GreenFlow can review the code, photos, equipment access, and symptoms before scheduling the right next step.

Schedule Service Back to product

Brands We Service

Popular cities

Service Areas

Our Happy Customers

Ray

Just had a service call because my tankless water heater stopped working with E110 code. Andrey located the root cause real quick and fixed the issue within half an hour, also gave reasonable recommendations for further maintenance.

Michele Z.

Andrey was professional, prompt, smart, thorough and exceedingly pleasant. We are likely switching our current HVAC company to Green Flow.

Dev W.

I had a breakdown of my cooling system and Hanna at Green Flow responded to my request right away. They scheduled me same day. The team at Green Flow was easy to communicate with over phone and text. They kept me updated on delays on arrival of the...

Sharad W.

Green Flow and the people who work there are terrific. Vlad and Andre are excellent. Andre was very helpful. He was punctual, respectful, efficient and knowledgeable. He did not try to sell me something I didn’t need ( as others have done before). I was charged $99 which...

View All