Green Flow Solution logo
Schedule Service

Troubleshooting code

Back to all A952V060BD3SB error codes

Trane A952V060BD3SB E2.3 troubleshooting

First-stage gas valve not energized when expected. Use this page to document the issue and prepare for service. GreenFlow should handle diagnosis for electrical, refrigerant, lockout, or recurring conditions.

Virtual Consultation +1 (857) 767-6414

What the code means

E2.3: First-stage gas valve not energized when expected

The RunTru by Trane A952V error-code table identifies E2.3 when the first-stage gas valve is not energized when it should be.

System area
Gas valve control
Service level
Call GreenFlow

Safe checks before calling

  • Confirm the thermostat is on, set correctly, and calling for heating or cooling.
  • Check the air filter and visible return-air path for obvious airflow restrictions.
  • Look around the outdoor unit for leaves, snow, ice, or other visible obstructions without opening the cabinet.
  • Take photos of the thermostat, outdoor unit, nameplate, and any visible flash pattern before scheduling service.

When to stop and call GreenFlow

Call GreenFlow if the code repeats, the system is locked out, heating or cooling is not restored, there is ice buildup, electrical odor, unusual noise, or any issue involving pressure switches, sensors, wiring, refrigerant, reversing-valve operation, or warranty coverage.

Share the visible code, model and serial number if available, photos, current symptoms, and whether the issue affects heating, cooling, or both.

Our Services

Showing services from our catalog

AHRI Certificate Matching Support service
ResidentialCommercialSupport

AHRI Certificate Matching Support

Match supported indoor and outdoor equipment combinations to AHRI certification records for planning and documentation.

View service details
Air Conditioner Blowing Warm Air service
ResidentialRepair

Air Conditioner Blowing Warm Air

Find the cause of warm air from a central AC system and restore proper cooling where possible.

View service details
Air Conditioner Not Cooling Repair service
ResidentialRepair

Air Conditioner Not Cooling Repair

Diagnose an air conditioner that runs but does not provide expected cooling.

View service details
Air Conditioner Short Cycling Repair service
ResidentialRepair

Air Conditioner Short Cycling Repair

Diagnose frequent AC starts and stops involving airflow, controls, electrical parts, sizing, or refrigerant conditions.

View service details
Air Conditioner Water Leak Repair service
ResidentialRepair

Air Conditioner Water Leak Repair

Diagnose condensate drainage, pan, coil, and pump conditions that cause water around an AC system.

View service details
Air Conditioner Will Not Turn On service
ResidentialRepair

Air Conditioner Will Not Turn On

Diagnose an AC system that does not start or respond to the thermostat.

View service details

E2.3 questions

What does E2.3 mean on a Trane A952V060BD3SB?

The RunTru by Trane A952V error-code table identifies E2.3 when the first-stage gas valve is not energized when it should be.

What Trane message is associated with E2.3?

The Trane source used for this page associates E2.3 with "First-stage gas valve not energized when expected". Match the visible display text, LED pattern, or alert wording to the exact code whenever possible.

What system area does E2.3 point to?

This code is grouped under gas valve control in the source-backed Trane troubleshooting data.

Which Trane documentation supports this E2.3 page?

Source-backed RunTru by Trane FNR-SVX005A-EN integrated furnace control error-code table for A952V variable-speed furnaces.

Is E2.3 related to combustion or furnace safety controls?

The Trane source row places this code in a combustion, ignition, limit, flame, or pressure-switch safety context. These codes should be interpreted from the exact equipment board and documented flash pattern.

Does E2.3 involve a control, board, drive, or module?

The Trane source row points to gas valve control. Record the exact code and visible alert text before any reset so the control history is not lost.

What information should be captured for E2.3 before clearing alerts?

Capture the exact code, any displayed alert text, the model and serial number, thermostat or control status, operating mode, symptoms, and photos of the display or LED pattern before the alert history is cleared.

Brands We Service

Our Happy Customers

Henry H.

Replace batteries in thermostat, checked furnace

Neal V.

In an industry that often fraught with contractors taking advantage of homeowners, Andrey was honest with his assessment and willing to install a product acquired elsewhere (most want that margin themselves), patiently answered my questions (I’m an engineer so like to understand what’s happening), and proactively offered practical...

Max P.

Green Flow got our AC back up and running at our condo the same day! Andrey was on time, super efficient, and with the right part on hand. The price was fair enough. Would definitely recommend them!

Judy B.

Andrey was very efficient, professional and on time. The team had fast response to questions. Price to do heatpump maintenance was reasonable.

Josh M.

Timely and friendly service, highly recommended.

Daniel M.

Responsive company, timely installation professionally done. Hannah is great!

Sharad W.

Green Flow and the people who work there are terrific. Vlad and Andre are excellent. Andre was very helpful. He was punctual, respectful, efficient and knowledgeable. He did not try to sell me something I didn’t need ( as others have done before). I was charged $99 which...

John F.

I needed 2 new AC units and decided to go with high efficiency heat pumps. I chose Greenflow because of the equipment they offered, and the price (2nd lowest quote and much cheaper than the average of all quote we received). Their technicians were very detail oriented and...

Tom T.

Fantastic job by Green Flow. Andrey, Andrei and Yuri were punctual, very neat, capable, and meticulous in replacing two complete HVAC systems and ductwork repairs in our home. They will now be our go to service for all our HVAC needs going forward.

Anna G.

They quickly identified the issue with the heating system and fixed it efficiently. He explained everything clearly and made sure I understood what was going on. Very professional and reliable, extremely satisfied with the service.

Aniket G.

We used Andrey to replace the HVAC system. He was quick, efficient and knew what he was doing. I would surely recommend him.

Lesley S.

We were very happy with our experience with Green Flow Solution. After our hot water heater was leaking and needed to be replaced, they were able to install a new one the same day. They were professional and thorough. Thank you!