Green Flow Solution logo
Schedule Service

Troubleshooting code

Back to all A952V100CD5SB error codes

Trane A952V100CD5SB E7.1 troubleshooting

First-stage gas valve energized when it should be off. Use this page to document the issue and prepare for service. GreenFlow should handle diagnosis for electrical, refrigerant, lockout, or recurring conditions.

Virtual Consultation +1 (857) 767-6414

What the code means

E7.1: First-stage gas valve energized when it should be off

The RunTru by Trane A952V error-code table identifies E7.1 when the first-stage gas valve is energized when it should be off.

System area
Gas valve control
Service level
Call GreenFlow

Safe checks before calling

  • Confirm the thermostat is on, set correctly, and calling for heating or cooling.
  • Check the air filter and visible return-air path for obvious airflow restrictions.
  • Look around the outdoor unit for leaves, snow, ice, or other visible obstructions without opening the cabinet.
  • Take photos of the thermostat, outdoor unit, nameplate, and any visible flash pattern before scheduling service.

When to stop and call GreenFlow

Call GreenFlow if the code repeats, the system is locked out, heating or cooling is not restored, there is ice buildup, electrical odor, unusual noise, or any issue involving pressure switches, sensors, wiring, refrigerant, reversing-valve operation, or warranty coverage.

Share the visible code, model and serial number if available, photos, current symptoms, and whether the issue affects heating, cooling, or both.

Our Services

Showing services from our catalog

AHRI Certificate Matching Support service
ResidentialCommercialSupport

AHRI Certificate Matching Support

Match supported indoor and outdoor equipment combinations to AHRI certification records for planning and documentation.

View service details
Air Conditioner Blowing Warm Air service
ResidentialRepair

Air Conditioner Blowing Warm Air

Find the cause of warm air from a central AC system and restore proper cooling where possible.

View service details
Air Conditioner Not Cooling Repair service
ResidentialRepair

Air Conditioner Not Cooling Repair

Diagnose an air conditioner that runs but does not provide expected cooling.

View service details
Air Conditioner Short Cycling Repair service
ResidentialRepair

Air Conditioner Short Cycling Repair

Diagnose frequent AC starts and stops involving airflow, controls, electrical parts, sizing, or refrigerant conditions.

View service details
Air Conditioner Water Leak Repair service
ResidentialRepair

Air Conditioner Water Leak Repair

Diagnose condensate drainage, pan, coil, and pump conditions that cause water around an AC system.

View service details
Air Conditioner Will Not Turn On service
ResidentialRepair

Air Conditioner Will Not Turn On

Diagnose an AC system that does not start or respond to the thermostat.

View service details

E7.1 questions

What does E7.1 mean on a Trane A952V100CD5SB?

The RunTru by Trane A952V error-code table identifies E7.1 when the first-stage gas valve is energized when it should be off.

What Trane message is associated with E7.1?

The Trane source used for this page associates E7.1 with "First-stage gas valve energized when it should be off". Match the visible display text, LED pattern, or alert wording to the exact code whenever possible.

What system area does E7.1 point to?

This code is grouped under gas valve control in the source-backed Trane troubleshooting data.

Which Trane documentation supports this E7.1 page?

Source-backed RunTru by Trane FNR-SVX005A-EN integrated furnace control error-code table for A952V variable-speed furnaces.

Is E7.1 related to combustion or furnace safety controls?

The Trane source row places this code in a combustion, ignition, limit, flame, or pressure-switch safety context. These codes should be interpreted from the exact equipment board and documented flash pattern.

Does E7.1 involve a control, board, drive, or module?

The Trane source row points to gas valve control. Record the exact code and visible alert text before any reset so the control history is not lost.

What information should be captured for E7.1 before clearing alerts?

Capture the exact code, any displayed alert text, the model and serial number, thermostat or control status, operating mode, symptoms, and photos of the display or LED pattern before the alert history is cleared.

Brands We Service

Our Happy Customers

Connie F.

I needed a thermostat installed. I called one day they were there the next day. Installed the thermostat and made sure it was working before they left. Came back the next day because no heat was coming out the vents and fixed that issue. No problems since. Thanks...

Howard H.

Great experience. Knowledgeable and very fair. Highly recommend

Henry H.

Replace batteries in thermostat, checked furnace

Randy J.

Thanks to Andrey for an amazingly quick response to my request for a service call. He diagnosed and fixed my issue within 24 hours of my asking for help. Excellent service. Thanks.

Johnson M.

Andrew is professional and on time on the schedule. I got the same day appointment scheduled, you do not know how hard it is to live in summer Boston without AC working properly. He identified issue very quick and got it fixed like in 10 mins. Gave me...

Neal V.

In an industry that often fraught with contractors taking advantage of homeowners, Andrey was honest with his assessment and willing to install a product acquired elsewhere (most want that margin themselves), patiently answered my questions (I’m an engineer so like to understand what’s happening), and proactively offered practical...

Anna G.

They quickly identified the issue with the heating system and fixed it efficiently. He explained everything clearly and made sure I understood what was going on. Very professional and reliable, extremely satisfied with the service.

Sheila Z.

My air conditioning died on one of the hottest days. I found green solutions online call them and within a few hours they were out to my house to figure out the problem. They came back the next day at 7 AM to fix it. All was good...

Drew

Diagnosed and replaced issue with furnace. Fast response and showed up right away to fix the issue at a competitive price

Robert B.

I honestly can't believe my experience with Green Flow. I submitted a request for help through Thumbtack and Hannah called me literally a minute later to schedule an appointment. Thirty minutes after that, Andree was at my place doing A/C repair and furnace service. One hour after that,...

Enrique B.

Tankless water heater failed . I contacted Green Flow and Aundrey was dispatched. He arrived on time diagnose the issue and called the manufacturer eventually they agreed to replace the unit. Within a few days a new unit was installed and hot water was restored. Service was fast...

Judy B.

Andrey was very efficient, professional and on time. The team had fast response to questions. Price to do heatpump maintenance was reasonable.