Troubleshooting code
Back to all DHC102H(3,4)*(L,M,H,X,Y,Z)A error codes
System lockout from flame-sense failure. Use this page to document the issue and prepare for service. GreenFlow should handle diagnosis for electrical, refrigerant, lockout, or recurring conditions.
What the code means
The Trane Precedent gas heat fault-code table identifies 2 flash as system lockout from failure to sense flame, with low-voltage grounding, gas valve, ignition board, flame sensor, wiring, burner crossover, or board issues listed as possible causes.
Call GreenFlow if the code repeats, the system is locked out, heating or cooling is not restored, there is ice buildup, electrical odor, unusual noise, or any issue involving pressure switches, sensors, wiring, refrigerant, reversing-valve operation, or warranty coverage.
Share the visible code, model and serial number if available, photos, current symptoms, and whether the issue affects heating, cooling, or both.
Showing services from our catalog
Match supported indoor and outdoor equipment combinations to AHRI certification records for planning and documentation.
View service details
Find the cause of warm air from a central AC system and restore proper cooling where possible.
View service details
Diagnose an air conditioner that runs but does not provide expected cooling.
View service details
Diagnose frequent AC starts and stops involving airflow, controls, electrical parts, sizing, or refrigerant conditions.
View service details
Diagnose condensate drainage, pan, coil, and pump conditions that cause water around an AC system.
View service details
Diagnose an AC system that does not start or respond to the thermostat.
View service detailsThe Trane Precedent gas heat fault-code table identifies 2 flash as system lockout from failure to sense flame, with low-voltage grounding, gas valve, ignition board, flame sensor, wiring, burner crossover, or board issues listed as possible causes.
The Trane source used for this page associates Ignition 2 Flash with "System lockout from flame-sense failure". Match the visible display text, LED pattern, or alert wording to the exact code whenever possible.
This code is grouped under precedent gas heat ignition board in the source-backed Trane troubleshooting data.
Source-backed Trane Commercial HVAC Help Center Precedent gas heat fault-code table for ignition-board diagnostics.
Yes. The Trane source row for this item is based on a displayed LED or flash pattern. Count the pattern exactly and compare it with the documented Ignition 2 Flash entry before interpreting the fault.
Yes. The documented row connects Ignition 2 Flash to precedent gas heat ignition board. Sensor-related alerts should be interpreted by the exact code and operating mode rather than grouped with unrelated sensor faults.
The source-backed description for this row includes a lockout condition. Record the exact code and avoid repeated reset attempts before the fault history is documented.
The Trane source row places this code in a combustion, ignition, limit, flame, or pressure-switch safety context. These codes should be interpreted from the exact equipment board and documented flash pattern.
The Trane source row points to precedent gas heat ignition board. Record the exact code and visible alert text before any reset so the control history is not lost.
Capture the exact code, any displayed alert text, the model and serial number, thermostat or control status, operating mode, symptoms, and photos of the display or LED pattern before the alert history is cleared.
Popular cities
Try another nearby city or contact GreenFlow to confirm service availability.
Schedule service
Our team will contact you to confirm the next step.
