Green Flow Solution logo
Schedule Service

Troubleshooting code

Back to all GEVE072 error codes

Trane GEVE072 Condensate level troubleshooting

Condensate level diagnostic. Use this page to document the issue and prepare for service. GreenFlow should handle diagnosis for electrical, refrigerant, lockout, or recurring conditions.

Schedule Service +1 (857) 767-6414

What the code means

Condensate level: Condensate level diagnostic

The Trane Axiom deluxe-control diagnostic table identifies condensate level when the condensate safety input reports a water-level or drain-related condition.

System area
Condensate safety
Service level
Service recommended

Safe checks before calling

  • Confirm the thermostat is on, set correctly, and calling for heating or cooling.
  • Check the air filter and visible return-air path for obvious airflow restrictions.
  • Look around the outdoor unit for leaves, snow, ice, or other visible obstructions without opening the cabinet.
  • Take photos of the thermostat, outdoor unit, nameplate, and any visible flash pattern before scheduling service.

When to stop and call GreenFlow

Call GreenFlow if the code repeats, the system is locked out, heating or cooling is not restored, there is ice buildup, electrical odor, unusual noise, or any issue involving pressure switches, sensors, wiring, refrigerant, reversing-valve operation, or warranty coverage.

Share the visible code, model and serial number if available, photos, current symptoms, and whether the issue affects heating, cooling, or both.

Condensate level questions

What does Condensate level mean on a Trane GEVE072?

The Trane Axiom deluxe-control diagnostic table identifies condensate level when the condensate safety input reports a water-level or drain-related condition.

What Trane message is associated with Condensate level?

The Trane source used for this page associates Condensate level with "Condensate level diagnostic". Match the visible display text, LED pattern, or alert wording to the exact code whenever possible.

What system area does Condensate level point to?

This code is grouped under condensate safety in the source-backed Trane troubleshooting data.

Which Trane documentation supports this Condensate level page?

Source-backed Trane Axiom WSHP-SVX10G-EN control diagnostic code table for Axiom water-source heat pump deluxe controls. Public copy is limited to diagnostic identification and service routing.

Does Condensate level involve a control, board, drive, or module?

The Trane source row points to condensate safety. Record the exact code and visible alert text before any reset so the control history is not lost.

What information should be captured for Condensate level before clearing alerts?

Capture the exact code, any displayed alert text, the model and serial number, thermostat or control status, operating mode, symptoms, and photos of the display or LED pattern before the alert history is cleared.

Brands We Service

Popular cities

Service Areas

Our Happy Customers

Neal V.

In an industry that often fraught with contractors taking advantage of homeowners, Andrey was honest with his assessment and willing to install a product acquired elsewhere (most want that margin themselves), patiently answered my questions (I’m an engineer so like to understand what’s happening), and proactively offered practical...

Anna G.

They quickly identified the issue with the heating system and fixed it efficiently. He explained everything clearly and made sure I understood what was going on. Very professional and reliable, extremely satisfied with the service.

Michael C.

always available, easy to get a hold of, as a property manager I get lots no heat emergency, usually get to it same day or next day

Dev W.

I had a breakdown of my cooling system and Hanna at Green Flow responded to my request right away. They scheduled me same day. The team at Green Flow was easy to communicate with over phone and text. They kept me updated on delays on arrival of the...

View All