Green Flow Solution logo
Schedule Service

Troubleshooting code

Back to all UHMC100CCV4 error codes

Trane UHMC100CCV4 2 Flashes troubleshooting

System lockout. Use this page to document the issue and prepare for service. GreenFlow should handle diagnosis for electrical, refrigerant, lockout, or recurring conditions.

Virtual Consultation +1 (857) 767-6414

What the code means

2 Flashes: System lockout

The Trane 18-CD29D1-14-EN integrated furnace control flash-code table identifies 2 flashes as system lockout after retries or recycles are exceeded.

System area
Ignition and operating lockout
Service level
Call GreenFlow

Safe checks before calling

  • Confirm the thermostat is on, set correctly, and calling for heating or cooling.
  • Check the air filter and visible return-air path for obvious airflow restrictions.
  • Look around the outdoor unit for leaves, snow, ice, or other visible obstructions without opening the cabinet.
  • Take photos of the thermostat, outdoor unit, nameplate, and any visible flash pattern before scheduling service.

When to stop and call GreenFlow

Call GreenFlow if the code repeats, the system is locked out, heating or cooling is not restored, there is ice buildup, electrical odor, unusual noise, or any issue involving pressure switches, sensors, wiring, refrigerant, reversing-valve operation, or warranty coverage.

Share the visible code, model and serial number if available, photos, current symptoms, and whether the issue affects heating, cooling, or both.

Our Services

Showing services from our catalog

AHRI Certificate Matching Support service
ResidentialCommercialSupport

AHRI Certificate Matching Support

Match supported indoor and outdoor equipment combinations to AHRI certification records for planning and documentation.

View service details
Air Conditioner Blowing Warm Air service
ResidentialRepair

Air Conditioner Blowing Warm Air

Find the cause of warm air from a central AC system and restore proper cooling where possible.

View service details
Air Conditioner Not Cooling Repair service
ResidentialRepair

Air Conditioner Not Cooling Repair

Diagnose an air conditioner that runs but does not provide expected cooling.

View service details
Air Conditioner Short Cycling Repair service
ResidentialRepair

Air Conditioner Short Cycling Repair

Diagnose frequent AC starts and stops involving airflow, controls, electrical parts, sizing, or refrigerant conditions.

View service details
Air Conditioner Water Leak Repair service
ResidentialRepair

Air Conditioner Water Leak Repair

Diagnose condensate drainage, pan, coil, and pump conditions that cause water around an AC system.

View service details
Air Conditioner Will Not Turn On service
ResidentialRepair

Air Conditioner Will Not Turn On

Diagnose an AC system that does not start or respond to the thermostat.

View service details

2 Flashes questions

What does 2 Flashes mean on a Trane UHMC100CCV4?

The Trane 18-CD29D1-14-EN integrated furnace control flash-code table identifies 2 flashes as system lockout after retries or recycles are exceeded.

What Trane message is associated with 2 Flashes?

The Trane source used for this page associates 2 Flashes with "System lockout". Match the visible display text, LED pattern, or alert wording to the exact code whenever possible.

What system area does 2 Flashes point to?

This code is grouped under ignition and operating lockout in the source-backed Trane troubleshooting data.

Which Trane documentation supports this 2 Flashes page?

Source-backed Trane 18-CD29D1-14-EN integrated furnace control flash-code table for XV80-style gas furnaces.

Is 2 Flashes an LED or flash-pattern code?

Yes. The Trane source row for this item is based on a displayed LED or flash pattern. Count the pattern exactly and compare it with the documented 2 Flashes entry before interpreting the fault.

Does 2 Flashes indicate a lockout condition?

The source-backed description for this row includes a lockout condition. Record the exact code and avoid repeated reset attempts before the fault history is documented.

Is 2 Flashes related to combustion or furnace safety controls?

The Trane source row places this code in a combustion, ignition, limit, flame, or pressure-switch safety context. These codes should be interpreted from the exact equipment board and documented flash pattern.

Does 2 Flashes involve a control, board, drive, or module?

The Trane source row points to ignition and operating lockout. Record the exact code and visible alert text before any reset so the control history is not lost.

What information should be captured for 2 Flashes before clearing alerts?

Capture the exact code, any displayed alert text, the model and serial number, thermostat or control status, operating mode, symptoms, and photos of the display or LED pattern before the alert history is cleared.

Brands We Service

Our Happy Customers

Baran O.

Fast response, punctual, resolved the issue quickly. Thank you

Alexey Z.

Great service! They were able to perform complex repairs as I requested. Instructed me well on future maintenance. Worked fast. Suggested future improvements. Great team, highly recommend.

Sharad W.

Green Flow and the people who work there are terrific. Vlad and Andre are excellent. Andre was very helpful. He was punctual, respectful, efficient and knowledgeable. He did not try to sell me something I didn’t need ( as others have done before). I was charged $99 which...

Randy J.

Thanks to Andrey for an amazingly quick response to my request for a service call. He diagnosed and fixed my issue within 24 hours of my asking for help. Excellent service. Thanks.

Rajib M.

Andrey from Green Flow came out exactly when he said he was going to and fixed a simple problem with the heating system at my rental property. Really appreciate the quick turnaround and fair pricing.

C S.

Responded late in evening, provided early first in the morning service for my HVAC heating going out. Showed up on time, gave heads up that on the way without prompting, came prepared and fixed the problem in less than one hour. Clear communication, professional, and very nice UI...

Truc S.

I was frustrating about my heat system, they were very responsive and efficient. Andrey show up at my house after 30 mins from my call and on Sunday. He very acknowledge what is he doing. Thank you so much

Daniel M.

Responsive company, timely installation professionally done. Hannah is great!

Gilberto C.

Great service. It was awesome that they were able to solve my heating issue in few hours. Love the transparency on the pricing. Andrey was great!

Jahangir R.

They were very organized to communicate and be on time to come to look at my air condition to fix it.

Angela B.

I have used Green Flow solutions several times now for my HVAC needs and they have earned my trust! Always quick to schedule and repair things. Andrey is always pleasant to work with. I appreciate that they give honest recommendations and don’t try to upsell to the most...

John F.

I needed 2 new AC units and decided to go with high efficiency heat pumps. I chose Greenflow because of the equipment they offered, and the price (2nd lowest quote and much cheaper than the average of all quote we received). Their technicians were very detail oriented and...