Green Flow Solution logo
Schedule Service

Troubleshooting code

Back to all UHMC100CCV4 error codes

Trane UHMC100CCV4 7 Flashes troubleshooting

Gas valve circuit error. Use this page to document the issue and prepare for service. GreenFlow should handle diagnosis for electrical, refrigerant, lockout, or recurring conditions.

Virtual Consultation +1 (857) 767-6414

What the code means

7 Flashes: Gas valve circuit error

The Trane 18-CD29D1-14-EN integrated furnace control flash-code table identifies 7 flashes as a gas valve circuit error.

System area
Gas valve circuit
Service level
Call GreenFlow

Safe checks before calling

  • Confirm the thermostat is on, set correctly, and calling for heating or cooling.
  • Check the air filter and visible return-air path for obvious airflow restrictions.
  • Look around the outdoor unit for leaves, snow, ice, or other visible obstructions without opening the cabinet.
  • Take photos of the thermostat, outdoor unit, nameplate, and any visible flash pattern before scheduling service.

When to stop and call GreenFlow

Call GreenFlow if the code repeats, the system is locked out, heating or cooling is not restored, there is ice buildup, electrical odor, unusual noise, or any issue involving pressure switches, sensors, wiring, refrigerant, reversing-valve operation, or warranty coverage.

Share the visible code, model and serial number if available, photos, current symptoms, and whether the issue affects heating, cooling, or both.

Our Services

Showing services from our catalog

AHRI Certificate Matching Support service
ResidentialCommercialSupport

AHRI Certificate Matching Support

Match supported indoor and outdoor equipment combinations to AHRI certification records for planning and documentation.

View service details
Air Conditioner Blowing Warm Air service
ResidentialRepair

Air Conditioner Blowing Warm Air

Find the cause of warm air from a central AC system and restore proper cooling where possible.

View service details
Air Conditioner Not Cooling Repair service
ResidentialRepair

Air Conditioner Not Cooling Repair

Diagnose an air conditioner that runs but does not provide expected cooling.

View service details
Air Conditioner Short Cycling Repair service
ResidentialRepair

Air Conditioner Short Cycling Repair

Diagnose frequent AC starts and stops involving airflow, controls, electrical parts, sizing, or refrigerant conditions.

View service details
Air Conditioner Water Leak Repair service
ResidentialRepair

Air Conditioner Water Leak Repair

Diagnose condensate drainage, pan, coil, and pump conditions that cause water around an AC system.

View service details
Air Conditioner Will Not Turn On service
ResidentialRepair

Air Conditioner Will Not Turn On

Diagnose an AC system that does not start or respond to the thermostat.

View service details

7 Flashes questions

What does 7 Flashes mean on a Trane UHMC100CCV4?

The Trane 18-CD29D1-14-EN integrated furnace control flash-code table identifies 7 flashes as a gas valve circuit error.

What Trane message is associated with 7 Flashes?

The Trane source used for this page associates 7 Flashes with "Gas valve circuit error". Match the visible display text, LED pattern, or alert wording to the exact code whenever possible.

What system area does 7 Flashes point to?

This code is grouped under gas valve circuit in the source-backed Trane troubleshooting data.

Which Trane documentation supports this 7 Flashes page?

Source-backed Trane 18-CD29D1-14-EN integrated furnace control flash-code table for XV80-style gas furnaces.

Is 7 Flashes an LED or flash-pattern code?

Yes. The Trane source row for this item is based on a displayed LED or flash pattern. Count the pattern exactly and compare it with the documented 7 Flashes entry before interpreting the fault.

Is 7 Flashes related to combustion or furnace safety controls?

The Trane source row places this code in a combustion, ignition, limit, flame, or pressure-switch safety context. These codes should be interpreted from the exact equipment board and documented flash pattern.

Does 7 Flashes involve a control, board, drive, or module?

The Trane source row points to gas valve circuit. Record the exact code and visible alert text before any reset so the control history is not lost.

What information should be captured for 7 Flashes before clearing alerts?

Capture the exact code, any displayed alert text, the model and serial number, thermostat or control status, operating mode, symptoms, and photos of the display or LED pattern before the alert history is cleared.

Brands We Service

Our Happy Customers

Drew

Diagnosed and replaced issue with furnace. Fast response and showed up right away to fix the issue at a competitive price

Connie F.

I needed a thermostat installed. I called one day they were there the next day. Installed the thermostat and made sure it was working before they left. Came back the next day because no heat was coming out the vents and fixed that issue. No problems since. Thanks...

Judy B.

Andrey was very efficient, professional and on time. The team had fast response to questions. Price to do heatpump maintenance was reasonable.

Julia

Our furnace was leaking due to the drain pipe being clogged. Andrey came out within a couple of hours of submitting a request via Thumbtack. He cleaned it out within 15 minutes and was on his way Price was reasonable for the job. Some other companies had a...

Terry S.

Excellent service from best tech!

Neal V.

In an industry that often fraught with contractors taking advantage of homeowners, Andrey was honest with his assessment and willing to install a product acquired elsewhere (most want that margin themselves), patiently answered my questions (I’m an engineer so like to understand what’s happening), and proactively offered practical...

Tom T.

Fantastic job by Green Flow. Andrey, Andrei and Yuri were punctual, very neat, capable, and meticulous in replacing two complete HVAC systems and ductwork repairs in our home. They will now be our go to service for all our HVAC needs going forward.

Megan S.

Great service - my air conditioning failed after hours on a Sunday. I could schedule the appointment online for Monday morning and the technician quickly diagnosed the problem and fixed it. Super helpful- will use them again!

Enrique B.

Tankless water heater failed . I contacted Green Flow and Aundrey was dispatched. He arrived on time diagnose the issue and called the manufacturer eventually they agreed to replace the unit. Within a few days a new unit was installed and hot water was restored. Service was fast...

Karina D.

Fast response, great communication, reliable quality - great overall experience!

Robert B.

I honestly can't believe my experience with Green Flow. I submitted a request for help through Thumbtack and Hannah called me literally a minute later to schedule an appointment. Thirty minutes after that, Andree was at my place doing A/C repair and furnace service. One hour after that,...

Nicholas M.

I called Green Flow Solutions in a hurry to diagnose and fix an AC unit in a commercial condo unit. They responded quickly, arrived urgently and performed an excellent job on the repair needed. Communication 10/10, professionalism 10/10 and quality 10/10. I will be recommending Green Flow Solutions...